The installation was performed with the i386 LiveUSB image, whose integrity was verified by a md5sum check. I'm not sure if it has anything to do with the failure, but my disks are MBR only due to their age; I am unable to test the installer with GPT partitions.
Below is a dmesg of the live image. Let me know if more information is needed.
Code: Select all
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-RELEASE #0: Tue Mar 4 22:49:17 AST 2014
root@ericbsd.ghostbsd.org:/usr/obj/i386.i386/usr/src/sys/GHOSTBSD i386
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1596.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106c2 Family = 0x6 Model = 0x1c Stepping = 2
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE>
AMD Features=0x100000<NX>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 2147483648 (2048 MB)
avail memory = 2072739840 (1976 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <051109 APIC1655>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <051109 RSDT1655> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7f700000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xdc80-0xdc87 mem 0xfe980000-0xfe9fffff,0xd0000000-0xdfffffff,0xfe940000-0xfe97ffff irq 16 at device 2.0 on pci0
agp0: <Intel 945GME SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7932k stolen memory
vgapci0: Boot video device
vgapci1: <VGA-compatible display> mem 0xfe880000-0xfe8fffff at device 2.1 on pci0
hdac0: <Intel 82801G HDA Controller> mem 0xfe938000-0xfe93bfff irq 16 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
mskc0: <Marvell Yukon 88E8040 Fast Ethernet> port 0xec00-0xecff mem 0xfebfc000-0xfebfffff irq 17 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon FE+ Id 0xb8 Rev 0x00> on mskc0
msk0: disabling jumbo frame support
msk0: Ethernet address: 00:25:b3:64:7d:61
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E3016 10/100 Fast Ethernet PHY> PHY 0 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xdc00-0xdc1f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x3f00
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xd880-0xd89f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xd800-0xd81f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xd480-0xd49f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe937c00-0xfe937fff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
hdacc0: <IDT 92HD75B3 HDA CODEC> at cad 0 on hdac0
hdaa0: <IDT 92HD75B3 Audio Function Group> at nid 1 on hdacc0
pcm0: <IDT 92HD75B3 (Analog 2.0+HP/2.0)> at nid 13,10 and 11,14 on hdaa0
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen1.1: <Intel> at usbus1
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel> at usbus0
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen3.1: <Intel> at usbus3
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Intel> at usbus2
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <SanDisk pSSD 16GB SSD 4.46> ATA-4 device
ada0: Serial Number DDZ053109183333
ada0: 66.700MB/s transfers (UDMA4, PIO 2048bytes)
ada0: 15631MB (32014080 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
ugen4.2: <Corsair> at usbus4
umass0: <Corsair Survivor 3.0, class 0/0, rev 2.10/0.00, addr 2> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x4100
umass0:1:0:-1: Attached to scbus1
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <Corsair Survivor 3.0 1.00> Removable Direct Access SCSI-4 device
da0: Serial Number 12470041800018240074
da0: 40.000MB/s transfers
da0: 15300MB (31334400 512 byte sectors: 255H 63S/T 1950C)
da0: quirks=0x2<NO_6_BYTE>
Root mount waiting for: usbus4
ugen4.3: <Image Processor> at usbus4
Trying to mount root from ufs:/dev/ufs/GhostBSD [ro,noatime]...
md0.uzip: 92815 x 65536 blocks
drm0: <Intel i945GME> on vgapci0
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
.Give some tips, please, i thought in use all my disk to install GhostBSD 3.1, which works, 