Success - sort of
I threw an old hdd in the computer, and during the install, I gave Ghost the entire disc (so no individual partitioning). Installed like a champ. Of course, I do not know if it installed because I used a hdd this time, or because I gave it the entire disc.
Now to get the display working correctly
JC
Problems with partitioning during install
Re: Problems with partitioning during install
Attempted to install the latest dev (10.25). Many thanks for the KDE version!
However, things did not go well:
For the Mate version, it booted up, but failed during the install:
udo gbi
diskinfo: da0: ioctl(DIOCGMEDIASIZE) failed, probably not a disk.
diskinfo: da0: ioctl(DIOCGMEDIASIZE) failed, probably not a disk.
diskinfo: da0: ioctl(DIOCGMEDIASIZE) failed, probably not a disk.
diskinfo: da0: ioctl(DIOCGMEDIASIZE) failed, probably not a disk.
diskinfo: da1: ioctl(DIOCGMEDIASIZE) failed, probably not a disk.
diskinfo: da1: ioctl(DIOCGMEDIASIZE) failed, probably not a disk.
diskinfo: da1: ioctl(DIOCGMEDIASIZE) failed, probably not a disk.
diskinfo: da1: ioctl(DIOCGMEDIASIZE) failed, probably not a disk.
['ada1-476940']
File Sanity Check -> OK
Deleting all gparts
Clearing gpt backup table location on disk
Running gpart on /dev/ada1
NEWFS: /dev/ada1p2 - ZFS
vfs.zfs.min_auto_ashift: 12 -> 12
EXITERROR: Error 1: zpool import -f -N tank
Cleaning up...
The KDE version did not boot all the way:
==> Remount rootfs as read-write
==> Make mountpoints /cdrom
Waiting for GhostBSD media to initiate
found /dev/iso9660/GHOSTBSD
Required memory 3163787264 for memdisk
Detected memory 34242011136
==> Mount swap-based memdisk
==> Replicate system image to swap-based memdisk
112197632 bytes (112 MB, 107 MiB) transferred 1.056s, 106 MB/s
118+1 records in
118+1 records out
123851384 bytes transferred in 1.162291 sec
cannot receive new filesystem stream: checksum mismatch or incomplete
init_shell="/rescue/sh"
==> unset rescue init kernel environment variables
==> Unmount filesystem for cloning
==> set /dev/md2 device for reroot
vfs.root.mountfrom="zfs.livecd"
==> Rerooting into memdisk
JC
However, things did not go well:
For the Mate version, it booted up, but failed during the install:
udo gbi
diskinfo: da0: ioctl(DIOCGMEDIASIZE) failed, probably not a disk.
diskinfo: da0: ioctl(DIOCGMEDIASIZE) failed, probably not a disk.
diskinfo: da0: ioctl(DIOCGMEDIASIZE) failed, probably not a disk.
diskinfo: da0: ioctl(DIOCGMEDIASIZE) failed, probably not a disk.
diskinfo: da1: ioctl(DIOCGMEDIASIZE) failed, probably not a disk.
diskinfo: da1: ioctl(DIOCGMEDIASIZE) failed, probably not a disk.
diskinfo: da1: ioctl(DIOCGMEDIASIZE) failed, probably not a disk.
diskinfo: da1: ioctl(DIOCGMEDIASIZE) failed, probably not a disk.
['ada1-476940']
File Sanity Check -> OK
Deleting all gparts
Clearing gpt backup table location on disk
Running gpart on /dev/ada1
NEWFS: /dev/ada1p2 - ZFS
vfs.zfs.min_auto_ashift: 12 -> 12
EXITERROR: Error 1: zpool import -f -N tank
Cleaning up...
The KDE version did not boot all the way:
==> Remount rootfs as read-write
==> Make mountpoints /cdrom
Waiting for GhostBSD media to initiate
found /dev/iso9660/GHOSTBSD
Required memory 3163787264 for memdisk
Detected memory 34242011136
==> Mount swap-based memdisk
==> Replicate system image to swap-based memdisk
112197632 bytes (112 MB, 107 MiB) transferred 1.056s, 106 MB/s
118+1 records in
118+1 records out
123851384 bytes transferred in 1.162291 sec
cannot receive new filesystem stream: checksum mismatch or incomplete
init_shell="/rescue/sh"
==> unset rescue init kernel environment variables
==> Unmount filesystem for cloning
==> set /dev/md2 device for reroot
vfs.root.mountfrom="zfs.livecd"
==> Rerooting into memdisk
JC
Re: Problems with partitioning during install
I finally find out the problem with this issue. I am not sure I will solve it, but at least I know what is the problem now.